Haybuster ROCK-EZE H-106, Operating Instructions And Parts Reference

Page: 22 / 70

14
H - 1 0 6 R O C K - E Z E O P E R A T I N G I N S T R U C T I O N S
To assure that all decals remain in place and in good condition, follow the
instructions below:
• Keep decals clean. Use soap and water - not mineral spirits, adhesive cleaners
and other similar cleaners that will damage the decal.
• Replace all damaged or missing decals. When attaching decals, surface
temperature of the machine must be at least 40° F (5° C). The surface must be
also be clean and dry.
• When replacing a machine component to which a decal is attached, be sure to
also replace the decal.
• Replacement decals can be purchased from your DuraTech dealer.
4.2 Shielding
Shields are installed for your protection. Keep them in place, and replace damaged
shields.
4.3 Personal equipment
Operators of this machine are encouraged to wear head, eye, and ear protection.
Loose clothing is discouraged.
4.4 Safety review
BEFORE OPERATING
• Read and follow all instructions contained in:
A. This 106 ROCK-EZE Operator’s Manual.
B. Tractor operator’s manual.
C. Decals placed on the ROCK-EZE and Tractor.
NOTE: Additional copies of the above mentioned materials can be obtained
from your dealer.
• Allow only responsible, properly instructed individuals to operate your machine.
Carefully supervise inexperienced operators.
• Use a tractor which meets the tractor requirements contained within this manual.
See REQUIRED FOR OPERATION: page 30.
• Make sure the machine is in good operating condition and that all protective
shields are in place and in proper working order. Replace damaged shields
before operating.