Haybuster H-1135, Operating Instructions Manual

Page: 24 / 176

14
H - 1 1 3 5 T U B G R I N D E R O P E R A T I N G I N S T R U C T I O N S
DURING OPERATION
1. Enforce the following safety precautions to prevent serious personal injury.
• Keep everyone clear of work area except operator seated at tractor controls.
• Never work on or near grinder unless engine is off, and all motion has stopped.
• Disengage PTO before starting engine.
2. Power take off shafts must be locked in place with protective PTO shields in place.
3. Keep hands, feet, and clothing away from power driven parts.
4. Keep shields in place and in good condition.
5. Watch out for and avoid any object that might interfere with the proper operation of the machine.
6. Loose clothing, necklaces, and similar items are more easily caught in moving parts. Avoid the use of
these items and keep long hair confined.
7. Because it is possible that your H-1135 may be used in dry areas or the presence of combustibles, special
precautions should be taken to prevent fires and fire fighting equipment should be readily available.
NORMAL SHUTDOWN PROCEDURE
WARNING:
For your safety and the safety of others, you must use the following normal shutdown
procedure before leaving the controls unattended for any reason, including servicing, cleaning, or
inspecting. A variation of the following procedure may be used if so instructed within this manual or
if an extreme emergency requires it.
1. Run H-1135 Tub Grinder until discharge conveyor is empty, and grind as much of the material in the tub
as possible.
2. Reduce engine speed to idle.
3. Disengage PTO
4. Disengage hydraulics.
5. Place transmission in park and set parking brake.
6. Shut off tractor engine and remove key.
7. Wait for all movement to stop.
8. Disconnect PTO driveline from tractor.
NO SMOKING IN THIS AREA
DANGER! NO OPEN FLAMES IN THIS AREA
8. Never allow riders on the machine at any time.