28
2 5 6 4 B A L E B U S T E R
O P E R A T I N G I N S T R U C T I O N S
3.3.14 Operating the machine
To operate the machine, perform the following steps:
1.
Load machine according to section 3.3.6 “Loading Bales”.
2.
With tractor at half speed, engage PTO.
3.
Increase tractor engine speed so PTO is at 1000 RPM.
4.
Engage conveyor chain orbit motor hydraulics.
5.
Drive as needed to spread as desired.
3.3.15 Loader Transport Pin
WARNING:
Never stand under loader when removing transport pins. Do not attempt to force pins
out, with the loader fully raised they can be easily removed.
The loader transport pins can be inserted into three positions:
1.
Upper hole: Holds the loader in the fully raised
position for transport.
2.
Middle hole: Holds the loader partly raised. This
improves rear visibility and reduces wind drag
during transportation
3.
Lowest hole: Holds the loader transport pin in
storage position.
3.3.16 Hydraulic Cylinder and Valve
All cylinder and valve hose connections should be tight and leak free. If the area near a hose connection becomes oily or
dirty repairs should be made to seal the leak. Hoses should be free of cracks or cuts to ensure safe operation. Cylinder
seal kits are available from your dealer to repair a leaky cylinder. Pin connections should be free of excessive wear. If
pins become worn they should be replaced. Also check yokes and mounts for cracks and wear.
WARNING:
Hydraulic fluid escaping under pressure can be almost invisible and can have sufficient
force to penetrate the skin. When searching for suspected leaks, use a piece of wood or cardboard
rather than your hands. If injured seek qualified medical attention immediately to prevent serious
infection or reaction.
loader transport pin
in storage position
Summary of Contents for Balebuster 2564
