Haybuster Balebuster 2564, Operating Instructions Manual

Page: 23 / 132

2 5 6 4 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
13
2.3 Machine operation check
With Tractor hooked up to the BALEBUSTER, try all functions on the machine.
WARNING: The electric\hydraulic system is polarity sensitive, reversing polarity will cause damage
to the solenoid P\N (4000174)
CAUTION: The electric\hydraulic system has a check valve installed on the valve. Oil will flow
only one direction from the tractor thru the valve.
With the engine off and key removed from the switch:
1. Adjust the spout, the fan housing should turn.
2. Adjust the deflector tip on the spout.
3. Adjust the slug bar
With the engine at idle:
1. Raise and lower the loading arms.
2. Adjust the spout if equipped with the hydraulic motor option.
3. Engage the bale conveyor, adjust conveyor speed control valve on the BALEBUSTER.
4. Engage the tractor PTO, the rotor, transfer auger, and fan should be running. Listen for any odd noises
and vibrations.
Three Pin Socket
An auxiliary power connection is provided inside the operators compartment for connecting monitors, implement
controllers, C.B. radios and other 12-volt equipment.
The three pin outlet is located on the right hand side to the rear of the seat. The outlet has a ground terminal and two
12-volt power terminals. One power terminal is through the key switch and the other is direct power.