background image

– GENERAL INFORMATION –

TECHNICAL DATA

This product is supplied with an integrated LED 
light source. The expected lifespan of the LED 
light source is 25,000 hours, which equates to 
8-10 years of general use. When the light source 
reaches its end of life, the whole luminaire should 
be replaced.

FITTING TYPE | Integrated LED
POWER (W) | 10W
COLOUR TEMPERATURE | 3000K warm white

ATTENTION

Ensure that the power supply to the circuit has 
clearly been turned OFF before installing the 
product. In some countries, electrical installation 
must be carried out by authorised electricians/
contractors; please check with your local 
authority for guidance. 

The product must not be modified in any way. 
HAY accepts no responsibility for any products 
that have been modified or tampered with. The 
external flexible cable or cord of this luminaire 
cannot be replaced. If the cord is damaged, 
the luminaire should be replaced. This lamp is 
designed for indoor use only.

CARE AND MAINTENANCE

The shade and the base can be cleaned with 
a soft damp cloth and mild detergent, or a dry 
microfibre cloth. Do not use alcohol or any other 
solvents to clean the product and avoid using 
abrasive or rough sponges. Ensure that the power 
supply has been turned OFF before cleaning the 
product.

Do not use wet or damp cloths for cleaning and 
maintaining the lamå body. Please use a dry, lint-
free cloth or duster to remove any dirt.

Do not place feet on the base of the light when 
moving the position of the head as this could 
damage the lamp.

Summary of Contents for ROPE TRICK

















Reviews: