
09/16
7501BL/7501BL240
Page 4 of 5
STEP 5:
Fold side flaps to over sides of tank, using the Velcro to attach the edges together.
STEP 6:
Pull open/down eyewash flap and yellow eyewash arm. Attach webbing loop around
eyewash arm below eyewash heads.
STEP 7:
Mount assembled eyewash and blanket in accordance with 7501/7501T/7501T240
installation instructions.
NOTICE: ALL POWER CONNECTIONS MUST BE MADE ACCORDING TO NEC CODE
USING TYPE 3R COMPLIANT EQUIPMENT. MODEL 7501T240 IS TYPE 4
COMPLIANT IF TYPE 4 COMPLAINT EQUIPMENT IS USED.
OPERATION AND TEST INSTRUCTIONS
Test weekly. Instruct all employees in the use of this emergency eyewash. Personnel should be
assigned to check liquid level daily.
STEP 1:
Lead patient to nearest eyewash station. Seconds can make the difference in
preventing serious eye injury.
STEP 2:
Pull yellow eyewash arm firmly. Eyewash arm will drop to activate eyewash.
STEP 3:
Lower head until eyes enter eyewash stream. Use thumbs and forefingers to hold
eyelids open. Flush for 15 minutes.
STEP 4:
Seek qualified medical attention immediately
For more information on Haws products, see our website:
www.hawsco.com
© 2016 Haws
®
Corporation – All Rights Reserved