LED Indicators
The HPS1P is equipped with LED lights to
assist in diagnosing print server or network
errors.
READY
This light will illuminate when the HPS1P has sufficient power and
the power adapter is plugged into the HPS1P. When the
server unit is powered on, the
Status
LED, along with either the
LAN
LED or the
READY
LED, will flash as part of the unit’s
P
ower
O
n
S
elf
T
est (
POST
). This indicates that the print server
hardware is properly configured. The HPS1P may take up to 1
minute to perform its internal diagnostic tests.
LAN
This light will illuminate and flash when the HPS1P detects 10M or
100M data transmissions over the network.
STATUS
This light will illuminate and flash when the HPS1P detects printer
data transmissions over the network.
Please note that the Reset button is located on the back of the HPS1P. Hold this button
down for more then 5 seconds to reset the print server into factory default mode.