9.
Once the Setup Wizard is activated, it will make sure you
have the necessary components to proceed with installation.
Please make sure you have connected your print server to
your network via an Ethernet connection, powered up your
printer and print server, and have connected the print server
to your printer.
Once the Setup Wizard has verified your settings, please
click on the “Next” button to continue. If there is a
problem with your setup, the Print Server Wizard will
inform you of it and provide you with a diagnostic solution.
You may choose to skip this initial network and print server
diagnostic screen by clicking on the “Skip” button if the
Wizard determines that you do not have the necessary
components to proceed.