13
Chapter II: System and Network Setup
2-1 Build Network Connection
Please follow the following instructions to build the network connection between your
new HOD45B access point and your computers and other network devices:
1.
Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’
socket of the PoE injector. Connect a Ethernet cable from the “Power + Data Out”
port on the PoE injector into the HOD45B
2.
Connect your HOD45B from the “LAN” on the PoE injector to your
computer/network or connect wirelessly to it.
3.
Connect all your computers and network devices (network-enabled consumer devices
other than computers, like game console, or switch / hub) to the network.
4.
Log into the setup page to configure the HOD45B.
Summary of Contents for HOD45B
Page 23: ...22...
Page 33: ...32...
Page 85: ...84 point to reboot...
Page 98: ...97 default settings...
