Instructions Manual
High-pressure piston pumps
XLT IEX – XLT HT IEX series
Cod. doc. M.I.XLTIEX-XLTHTIEX
Rev.
0
Page 22 of 32
This Manual is the property of the Manufacturer; any reproduction in any form, even partial, is prohibited.
NOZZLE TABLE
The table below is used to correctly select the nozzle based on the pump specifications (max. pressure and flow rate factor). The table shows an example (pump with Pmax=100
bar and Flow rate=15 l/min).
Select the pressure value in
the first line and move
down the table until the
flow rate factor that is
closest by defect to the
pump rate, then identify the
suitable nozzle type for the
required values. We
recommend selecting the
nozzle corresponding to the
flow rate factor
immediately below the
closest value (in the
example, the value circled in
green with the
uninterrupted line) in order
to preserve the desired
pressure values over time.
