Hawk X Pro Series User Manual Download Page 4

SILENT ARMING/DISARMING

Press the 

 

button, the lights will flash once and the system will be armed. 

I

f the motion 

detection sensor is triggered in silent arming mode for first time, indicator lights flashes 

slowly. 

S

ystem will revert to normal arming mode automatically, when shaken again. 

T

o disarm in silent arming mode press the 

 

button.  Press the 

 

button to quit silent 

arming and back to normal arming mode. 

ARMING IN TRANSPORT MODE (Temporary Sensor By pass)

A

PERMEANT MUTE ARMING AND DISARMING

Press      +     buttons simultaneously, indicator lights flash 2 times for mute mode. To  

disable permeant mute arming and disarming follow the above procedure, indicator lights  

flash 2 times, siren sound 2 times.

fter pressing   button to arm the system, press   again once within 3 seconds, 

indicator light flash once, indicating shock sensor and auxiliary sensor are both bypassed; 

now the motorbike can be transported freely. 

T

o turn on the shock sensor and auxiliary sensor, press   again, the bike will be back to 

normal arming status.

ENERGY SAVING MODE:

The HA

WK incorporates 

E

nergy 

S

aving Mode in order to conserve motorcycle battery charge. 

E

nergy 

S

aving Mode as follows:

Automatically

When alarm is armed after 2 days the alarm will enter automatically into sleep mode. 

The 

remote control fobs will not work or 

LED

 will not flash until system is awakened (see 

E

xit 

S

leep Mode).

Manually

To cancel energy saving mode:

Disarm the alarm, press and hold      button for 2 seconds. Siren will chirp once. Continue  

to hold Siren will chirp once and indicator will flash once.

To enable energy saving mode: 

Disarm the alarm  press and hold      button for 2 seconds. Siren will chirp twice and  

indicator will flash twice.

A

larm 

R

eaction in sleep mode

Turn ignition ON

, the system will be awaken and alarm will sound constantly 

 

until the ignition is switch 

O

FF. 

S

ystem will enter into normal mode after 5 seconds. 

S

hock sensor activated, alarm will activate for 30 seconds (shock sensor activated 

 

 1  stage, system will chirp 5 times and indicator light will flash 5 times). The

st

  

 

system will enter into normal mode after 5 seconds after alarm reaction finished. 

2

21

CONNECTING THE ALARM WITH SPECIFIC T HARNESS

(OPTIONAL EXTRAS)

Summary of Contents for X Pro Series













Reviews: