REVIEWING CAMERA STATUS AND MAKE CHANGES TO SETTINGS:
1. Make sure your mobile device is within 30 feet of camera.
2. Make sure ‘Bluetooth’ in your phone/tablet settings is ‘turned on’.
3. Open HAWK® SYNC™ APP and ‘SIGN IN’ to APP.
4. Select Camera in APP. This will take you to “SETTINGS PAGE”
5. In “SETTINGS” review number of “Media Count”, SD Card Capacity,
Battery Status and make changes to Camera Settings.
6. This can all be done standing away from camera without disturbing
immediate area.
VIEWING IMAGES AND VIDEOS:
Viewing Images and Videos from Micro SD Card
1. Open Control Compartment Door
2. Turn Power “OFF” on Camera
3. Remove Micro SD Card by pushing in on card until it “clicks”.
Then release and card will eject from the slot. Never pull
directly on Micro SD Card until it ejects from the slot.
4. Using a Micro SD Card Reader (not included) view your
photos and videos.
Viewing Images and Videos by USB directly connected to
Camera
1. Open Control Compartment Door
2. Turn Power "OFF" on Camera
3.Leave Micro SD Card inside of camera.
4.Plug micro USB portion into camera slot.
5.Plug USB side into selected device to view.
6. Follow prompt on device to view photos on camera
SETUP AND USE
03-2018 – 00
Page 12
QUESTIONS? Call 810-626-3026 or Visit
www.hawkhunting.com