ATTACHING CAMERA STRAP:
•
Loop short Camera Strap through side slot and place buckle through webbing loop.
•
Loop long Camera Strap through opposite side slot and place webbing though loop.
•
Thread buckle and adjust webbing for desired anchoring size.
MOTION AND VIEW TEST:
•
Select Motion and View Test
•
View Test
•
Press Test Photo – This shows a thumbnail picture of what your camera is
seeing. Allows quick check of camera to assure it is in correct position.
•
Motion Test
•
Turn on Motion Test by sliding bar to on position
•
When camera PIR sensor detects motion, a red dot will appear in target
area. Also red LED on camera will light up.
•
This shows you range and field of view PIR sensor will detect movement
.
CAMERA PLACEMENT AND USE:
•
Place Camera in desired location
•
Making sure your mobile device is within 30-FT of
camera, go to APP setup. Go to
Motion and View
Test
in APP.
•
In top right corner press Test Photo
•
View and adjust camera if needed
•
Exit motion and view test
•
Confirm by pressing < arrow in Top left of Setup
Screen
•
Camera red light will flash several times, confirming
camera is enabled and ready to take triggered
images or video
SETUP AND USE
03-2018 – 00
Page 11
QUESTIONS? Call 810-626-3026 or Visit
www.hawkhunting.com