1. Turn release valve counter clockwise one full turn to open.
2. Pump handle eight full strokes.
3. Turn release valve clockwise to close valve.
4. Pump handle until the ram reaches maximum height and continue to pump several times to remove trapped
air in the ram.
5. Carefully and slowly pinch oil fill plug to released trapped air.
6. Turn the release valve counterclockwise one full turn and lower ram to the lowest position.
7. Turn release valve clockwise to closed position and check for proper pump action. It may be necessary to
perform the above more than once to make sure air is evacuated totally.
MAINTENANCE
WARNINGS!
SYSTEM AIR PURGE
WARNING!
1. Read, study and understand all warnings and operating instructions prior to use.
2. Do not overload this jack beyond the rated capacity.
3. This jack is designed for use on hard level surfaces capable of sustaining the load.
4. This is a lifting device only. The load must be supported immediately by support stands.
5. Do not get under or allow anyone under the vehicle until it has been supported by
support stands.
6. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
7. Centre load on saddle prior to lifting.
8. Some vehicles require an adapter to properly engage the frame for lifting.
9. Use vehicle manufacturers instructions on proper lifting.
10. No alterations to the jack should be made.
11. Failure to heed these warnings may result in personal injury and/or property
damage.
Summary of Contents for 2 Ton Aluminium Trolley Jack
Page 4: ......
