PSC1502 AUDIO SYSTEMS
INSTALLATION GUIDE
HAWG WIRED
PAGE 9
NEWARK, CA
U
U
S
S
E
E
R
R
G
G
U
U
I
I
D
D
E
E
CONNECTORS AND CONTROLS
PLANNING YOUR SYSTEM
CONFIGURATION IS THE FIRST
STEP TOWARDS HI-FI
HAPPINESS, AND IT’S TIME
YOU GET FAMILIAR WITH ALL
THE BELLS AND WHISTLES ON
YOUR NEW AMPLIFIER(S). THE
TABLE BELOW LISTS THE
CONTROLS AND CONNECTORS
OF THE PSC1502 AMPLIFIER.
A MAIN POWER TERMINALS
G CROSSOVER
MODE
SWITCH
N
LOW LEVEL INPUT
B AMPLIFIER
PROTECTION
FUSE
J INPUT GAIN ADJUST
P
LEFT SPEAKER OUT
C POWER
INDICATOR
L HIGH LEVEL INPUT
Q
RIGHT SPEAKER OUT
E CROSSOVER
FILTER
ADJUST
CONNECTORS DEFINED
HIGH LEVEL INPUT CONNECTOR:
THIS CONNECTOR ALLOWS THE AMPLIFIER TO USE SPEAKER OUTPUTS FROM A SOURCE UNIT AS
INPUTS TO THE AMPLIFIER. THIS IS THE ONLY WAY TO CONNECT A FACTORY HARLEY-DAVIDSON
®
SOURCE UNIT TO THIS SYSTEM.
WIRE COLORS FOR THE HIGH LEVEL INPUT CABLE(S):
LEFT (+)
LEFT (–)
RIGHT (+)
RIGHT (–)
HIGH LEVEL
CABLE
WHITE
BLACK/
TWISTED WITH
WHITE
RED
BLACK/
TWISTED WITH RED
LOW LEVEL INPUT CONNECTOR:
THIS CONNECTOR ALLOWS THE AMPLIFIER TO USE INDUSTRY STANDARD RCA OUTPUTS FROM AN
AFTERMARKET SOURCE UNIT AS INPUTS TO THE AMPLIFIER. THIS IS THE PREFERRED METHOD WHEN
RCA OUTPUTS ARE AVAILABLE, AND WILL PRODUCE THE CLEANEST SOURCE SIGNAL TO THE
AMPLIFIER.
NOTE: WE USE INDUSTRY STANDARD 3.5MM HEADPHONE STYLE JACKS ON THE AMPLIFIER DUE TO THE SPACE
CONSTRAINTS (2 3.5MM PHONO-JACKS ARE A LOT SMALLER THAN 4 RCA JACKS). ALTHOUGH WE HIGHLY
RECOMMEND USING THE LOW LEVEL INPUT CABLES WE SUPPLY WITH THE KIT, TECHNICALLY YOU SHOULD BE ABLE
TO UTILIZE ANY STANDARD RCA TO PHONO ADAPTER CABLE FOUND AT YOUR LOCAL ELECTRONIC STORE TO MAKE
THESE CONNECTIONS. IT’S OUR GOAL TO KEEP THINGS SIMPLE AND STANDARD IF AT ALL POSSIBLE.
