HAWE Hydraulik A 065, Original Assembly Instructions

Page: 6 / 34

2
For your safety
The product is built according to the state of the art and recognized safety regulations.
Nevertheless, there is a risk of personal injury and damage to property if this chapter and the safety
instructions in this manual are not observed.
2.1 Intended use
■
The product is a technical work tool and intended for commercial and industrial use only.
■
The product may only be operated in accordance with the technical data, operating conditions and
performance limits specied in this manual.
■
Only use original accessories and original spare parts approved by the manufacturer.
■
The product may only be used indoors.
■
The product is primarily used to raise and lower operating tables/robots, window lifters and test
benches.
Partly completed machinery
The product is a partly completed machine according to the EC Machinery Directive 2006/42/
EC and is intended exclusively for installation in a machine or system. The product is
controlled via the manufacturer's machine / plant control.
Follow the manufacturer's operating instructions.
2.2 Misuse
■
Use in other operating modes than specied in the intended use
■
Using the product beyond the specied performance limits
■
Do not use the product in potentially explosive areas.
■
Do not paint over elastic seals, the bearings of moving parts or hose lines.
2.3 Residual risks
When handling hydraulic uid, comply with the safety data sheet of the manufacturer of the
hydraulic uid.
DANGER
Hazard from explosive combustion
Hydraulic uid as well as the mist and vapor of hydraulic uid are re accelerants. Contact with ignition
sources leads to explosive combustion. Serious injury or death.
Avoid re, open ames and smoking in the vicinity of the product.
Immediately dispose of combustible materials wetted with hydraulic uid as special waste.
Do not use ammable or corrosive cleaning uids.
6/34 B 6025 - 12-2021 - 1.1en HAWE Hydraulik SE