hawa Concepta 35 pre-mounted, Installation Instructions Manual

Page: 7 / 52

7/52
Hawa Concepta 35 pre-mounted
1 Table of contents
2 Product information 8
3 Safety instructions 8
4 Abbreviations, symbols 14
5 Overviews 5.1 Overview: Left-hand systems 15
5.2 Overview: Connector 55 mm (optional)
16
5.3 Overview: Connector 110 with and without plinth (optional) 17
5.4 Overview: Position numbers
18
6 Planning 6.1 Planning: Doors closing against base and top section with Connector 55 19
6.2 Planning: Doors closing against base and top section with Connector 110
20
7 Calculation 7.1 Calculation: Door size/height ratio 21
7.2 Calculation: Plan view dimensions 22
7.3 Calculation: Hardware depth
23
7.4 Calculation: Drill hole positions 24
8 Pre-assembly
8.1 Pre-assembly: Processing the left side profiles
26
8.2 Pre-assembly: Processing the right side profiles 27
8.3 Pre-assembly: Scissor and bar installation, left-hand systems 28
8.4 Pre-assembly: Aligning the cabinet
32
8.5 Pre-assembly: Outside face 33
9 Assembly
9.1 Assembly: Door; hinge pre-mounted to upright
34
9.2 Assembly: Door closing system 36
9.3 Assembly: Fine adjustment of upright inclination for door thickness between 19 - 22 mm
39
9.4 Assembly: Positioning the top stop dampener 41
9.5 Assembly: Positioning the bottom stop dampener 42
9.6 Assembly: Closing door with scissor bearing
43
9.7 Assembly: Adjusting the door height 44
9.8 Assembly: Door gap fine adjustment 45
9.9 Assembly: Front depth fine adjustment
46
9.10 Assembly: Fine adjustment pull-in speed 47
10 Disassembling
10.1 Disassembling: Door closing system for stationary external face
48
Contents
Page