English
17
MAINTENANCE
Always turn off and unplug the appliance before you perform any maintenance.
Clean the filters
–
Remove the air and water filters. Clean them with neutral detergent and a
brush, then rinse with water. Reinstall in the appliance.
Note:
The filters must be installed vertically, in order to avoid leaking.
–
Remove and install the air filter:
Gently press the release tabs on top of the
filter, and pull it down and away from unit. Insert the bottom tabs into the slots,
and press the release tabs to put it back in place.
–
Remove and install the water filter:
Grab the filter and carefully slide out of,
or put into the unit.
Clean the bottom water tank
1. Remove the bottom drain plug to release the water.
Note:
Ensure you have a container under the drain to collect the water, or
empty the water tank outdoors.
2. Remove the filters. The water tank cannot be removed from the appliance.
Remove dirt and dust by using a brush with neutral detergent. Then use clean
water to wash it. You may have to empty the water tank a few times.
3. Use a damp cloth to dry it. Reinstall the filters.
Caution:
Do not use harsh detergents, chemical cleaners or solvents as they
may damage the surface of the plastic components.
Caution:
The water tank is not detachable, do not allow water or other liquids to run
into the interior of the product, as this could create a fire and/or electrical hazard.
Clean the cabinet
–
Clean with neutral detergent and a soft cloth.
Note:
Do not rinse with water, or leave any water on the surface.
