1) Tip the Docking Station to a position that is comfortable to work with.
2) Install all cables that are necessary for computing needs.
3) Use Zip Ties (Hardware Kit Item 1) and the Strain Relief Points to secure cables and reduce risk of
accidental disconnects.
4) Create a service loop with cables to ensure that no tension is on the connectors and to enable
intended motion.
5) Tie off cables onto a stationary part of the mounting system.
Cable Management
4
5
This loop must be large enough to allow
full range of expected rotation and
extension without stressing connections.
Collect cables to secure to the
mounting system.
(Note: mounting system not included)
