Before Beginning
Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the
DS-PAN-1400 Series Docking Station for the Panasonic TOUGHBOOK FZ-A3 Fully Rugged Tablet.
For questions regarding the set-up of your DS-PAN-1400 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
This Owner’s Manual applies to the following Part Numbers:
DS-PAN-1401
DS-PAN-1401-2
DS-PAN-1402
DS-PAN-1402-2
DS-PAN-1403
DS-PAN-1406
•
NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
•
DO NOT USE COMPUTER WHILE DRIVING.
•
READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
•
DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.
ARE PRESENT
•
DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR UNDOCKING WITH YOUR
COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES CAN CAUSE PERMANENT DAMAGE.
•
FOR THE DS-PAN-1401, DS-PAN-1401-2, DS-PAN-1402, DS-PAN-1402-2 DOCKING STATIONS: DO NOT CONNECT
DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certified, automotive grade, Panasonic approved
90W power source rated for a continuous, regulated 16 VDC output (Havis Part Number LPS-102 or equivalent).
Failure to comply with this requirement will cause product damage that is NOT repairable and is NOT covered
under warranty.
•
FOR THE DS-PAN-1403 and DS-PAN-1406 DOCKING STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE
SOURCE: The Panasonic FZ-A3 Fully Rugged Tablet requires a certified, Panasonic approved power source rated for
a continuous, regulated 16 VDC output. Failure to comply with this requirement will cause product damage that is
NOT repairable and is NOT covered under warranty.
•
WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN 10°C to 35°C (50°F to 95°F).
PLEASE REFER TO PANASONIC TOUGHBOOK FZ-A3 OWNER’S MANUAL FOR MORE INFORMATION.
Precautions
•
Do not place metal objects or containers of liquid on top of the Docking Station
•
If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
•
Use only the specified Power Supply (Part # LPS-102) with this Docking Station
•
Do not connect cables into ports other than what they are specified for
•
Do not leave the Docking Station in a high temperature environment (greater than 71°C, 160°F) for a long period of
time
