C-TCB-26_INST_9-07
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Remove front inner and outer passenger seat bolts on vehicle.
INSTALLATION:
1. MOUNT TELESCOPING COMPUTER BASE:
•
Position pole support assembly on top of passenger seat base mount and align holes in
pole support assembly with holes in seat base.
•
Loosely attached factory seat bolts that were removed during subassembly.
•
Loosely mount side support brace to threaded rod located on pole support assembly
using a 5/16-18 Nylock nut
•
Mount side support brace to vehicle using ¼” x ¾” Hex head lag bolts. A 3/16” pilot
hole is required.
Note: When mounting side support brace to floor of vehicle, be sure to check for obstructions prior to
drilling or lag bolting to floor.
•
Tighten down factory passenger seat bolts and 5/16-18-nylock nut holding side
support brace to pole support assembly.
•
Mount optional C-3090, computer-mounting platform, to telescoping pole assembly
using hardware and instructions provided with C-3090.
