Important Note:
The Controller must be fully charged
before you begin the installation process
(full charge takes approximately 6 hours).
Setting Up the Bases
Installing the Bases:
Position all 4 Bases at the far corners inside of your home and near a
power outlet (including the attached garage if it applies).
1.
Install the Master Base first.
To identify it from the rest of the Bases,
check to find the words, “Master Base” printed on the back of the unit.
2.
Position the Master Base in an interior corner wall near the area where
your dog spends most of his time outdoors. Make sure a power
outlet is nearby. (see Illustration A)
3.
Peel and place the removable wall-mount adhesive tape to the
back of the Master Base. If preferred, use the screws provided to
mount the Master Base. (See page 8 for details)
4.
Attach the Master Base to a wall or window frame approximately
6 feet off the floor and plug into the power outlet.
(see Illustration B)
5.
A green power light will display indicating the Base unit is on.
Deck
Master Base
Base
Base
Base
Installing the Custom-Shape Wireless Dog Fence
Havahart
®
Custom-Shape Wireless Dog Fence
7
1
Installing the Custom-Shape Wireless Dog Fence -
Setting Up the Bases
Illustration A
Illustration B
Summary of Contents for Custom-Shape Wireless Dog Fence 5144G-A
Page 32: ......
