2
Contents
Page
Product description ........................................................... 1
Important safety instructions ............................................. 2
Installation information ....................................................... 3
Features ........................................................................... 3
Wiring diagram ................................................................. 4
Equipment overview .......................................................... 4
Housing dimensions ......................................................... 5
Wire lengths and cross sections ....................................... 6
Mounting of the control unit .............................................. 6
Overview of the major components and modules ............. 7
Additional diagram drives ................................................ 16
Installing the battery packs ............................................. 17
Fastening the live wires ................................................... 17
Function test .................................................................. 18
Elimination of fault functions ............................................ 18
Care, Service, Maintenance, Disposal ............................. 18
Technical specifications .................................................. 19
CAUTION
The safety of personnel requires that the
following instructions be observed.
Incorrect installation may result in severe or
fatal injury!
The control unit complies with the state of
the art. This applies to performance, material,
functioning and the safe operation of the control
unit.
Mortal danger by electric shock!
The smoke and heat exhaust control
unit operates with 230 V AC / 50 Hz.
Mortal danger if coming into contact
with cables that are live.
During service/maintenance work at
the unit, the supply voltage has to be
disconnected via isolating link at all
poles. Protect the system against
unintentional re-starting. The isolating
link must be clearly marked. The mains
fuse must not exceed the rated current
of 6A. Pull off the connecting plugs of
the emergency power battery packs.
Make sure that all potential-free inputs
of the wires are disconnected from the
power supply.
Risk of crushing and pinching!
To avoid misuse, a risk assessment
acc. to Machinery Directive 2006/42/EC
is required at the installation site.
Protective measures are to be applied
according to EN 60335-2-103/2016-05.
The mounting of the control unit has to be
performed by trained, qualified and safety-
conscious electrical staff according to these
installation and operating instructions. These
include electrical fitters or skilled fitters with
training in the field of electrical equipment
installation. All work on live components may be
performed only by a skilled worker with comple-
ted professional training in the field of electrical
equipment installation.
WARNING:
Important safety instructions!
