58
Technical specification
Complete system
(Lift drive and sliding drive)
‘HS comfort drive’
Sash width (FB)
720 to 3235 mm
Sash height (FH)
1870 to 2850mm
Outer frame width
max� 6500 mm
Max� sash weight
300 kg
Max� sliding force of drive
200 N
Electrical characteristics
Rated voltage
24 V DC (-10%, +30%)
Permitted voltage range
21,6 to 31,2 V DC
Max. allowable ripple
≤ 20% related to rated voltage
Current consumption
4 A at 24 V
Max� power consumption
100 W
Switching-off in each position (blockade) yes, safety switching-off (blockade) in direction OPEN and CLOSE until 300 kg
Protection class
III safety extra-low voltage SELV
Connection and operation
Duty cycle
20 cycles or ED 30
Lifetime
25�000 cycles (class 5 EN 13126-1)
Reading out of operating conditions
yes
Maintenance
once a year, acc� to general maintenance guidelines
Connection to WLAN-Box
Address (delivered condition)
103
Installation and environmental conditions
Nominal temperature
20 °C
Ambient temperature range
-5 to +60 °C (environmental category 1 acc. to VdS 2580)
Protective system
IP 40 acc� to DIN EN 60529
Environmental conditions
for dry environments, only; no dew formation, no aggressive fumes, no dusty environments
Notes for power supply and control
Switching power supplies (SNT) and
transformer power supplies
suitable for C-load with power reserves for the moment of switching-on and switching-off of
the drives
Low voltage (24 V)
overvoltage category I must be guaranteed
Approvals and certificates
Electrical safety
yes, acc� to EN 60335-1 and EN 60335-2-103
EMV compatibility
yes, acc� to DIN EN 55014-1, 55014-2 und 61000-6-3
CE compliant
yes, acc� to EMC Directive 2004/108/EG and Low-voltage Directive 2006/95/EG
