17
ENGLISH
APPLICATION
ASSEMBLY
Check the delivery parts
Carefully remove the power tool from its packaging and check if the following
parts are complete:
-- 1/4 sheet sander
-- Dust box
-- Sandpaper
-- Punch plate
If any parts are missing or damaged, please contact Customer Service at the
number indicated on the front page of this Manual.
Parts list
The numbering of the product parts refers to the illustration of the power tool on
page 2 (fig. A).
1. Palm grip
2. On/off switch
3. Sander pad
4. Dust collection bag
5. Sandpaper clamp lever
6. Punch plate
Selecting the right grade of sandpaper
� Different grades of sandpaper can be purchased from your local RONA
store. Available grades are: Coarse, Medium and Fine.
� Use a coarse grit to sand down rough finishes, medium grit to smooth the
work and fine grit to finish off.
� It is best to make a trial run on a scrap piece of material to determine the
optimum grades of sandpaper for a particular job. If there are still marks on
your work after sanding, try either going back to a coarser grade and sanding
the marks out before recommencing with the original choice of grit, or try
using a new piece of sandpaper to eliminate the unwanted marks before
going on to a finer grit and finishing the job.
TECHNICAL DATA
RONA code
1/4 Sheet sander
Voltage rating
Current rating
No-load speed
Pad size
59595005
PT100612
120 V AC / 60 Hz
2.0 amp
12,000 OPM
4-1/4" x 4-1/2" (108 x 113 mm)
WARNING!
Always ensure that the tool is switched off and the plug is removed from
the power source before making any adjustments or performing maintenance
procedures.
!
Summary of Contents for 59595005
Page 2: ...A 1 ...
Page 12: ...11 ENGLISH FRANÇAIS SCHÉMA SCHEMATIC DRAWING ...
