116
4000328140 E01.15
AUS
Telescopic handlers
H
- Lubrication and maintenance
2 - Maintenance instructions
Safety prop
• Wear protective clothing and personal protection equipment supplied or required by the job
conditions.
• If the engine is started inside a building, there must be sufficient ventilation to remove the exhaust
gases.
• Always refit the guards and plates that have been dismantled before starting the machine.
• Paintwork shall be performed in well-ventilated premises using approved protective equipment.
• The engine cooling system operates under pressure. The pressure is regulated by the radiator cap.
Before operate maintenance operation on hydraulic component or component localized under the boom,
use safety prop as follow :
• Place the boom to 24° - 25° (without load and machine on wheels).
• Put the safety prop in the boom in the same way that it is shown in the picture (it is prohibited to lift up
or lift down the boom with the safety prop placed).
• Proceed to work under boom.
Do not wear loose fitting clothes or jewellery that could get caught on controls or moving parts.
Do not perform Telehandler servicing or maintenance with the engine running.
Never dismantle a component from the system while it is hot. Always loosen the radiator cap slowly and
let the pressure escape before removing it completely.
Summary of Contents for HTL 3010
