102
4000328140 E01.15
AUS
Telescopic handlers
F
- Emergency procedure
• Slowly unscrew the cap situated on the boom lift plate (first plate from the back) until you can see the
boom lowering, then unscrew once the boom in low position (2).
• Once the boom is lowered and the machine has been repaired, raise the boom to its high position and
secure it into place using the cylinder prop.
• Unscrew the stop screw from the counter-balance valve block, replace the counternut and rescrew
the assembly fully into its socket.
• Check that the counter-balance valve functions properly after the intervention (by raising/lowering the
boom with a load).
3 - Emergency exit from cab
In an emergency, exit from the cab can be achieved via the rear window..
Secure the boom into position before any interventions on the counter-balance valve.
• Release the stop ( 1 ) upwards.
• Push the window ( 2 ) outwards with your hand.
In accordance with the local and governmental regulations in force in some countries, a "break glass
hammer" is provided inside the cab to allow exist in an emergency by breaking the rear window glass.
2
1
2
Summary of Contents for HTL 3010
