Haulotte H28TJ+, Maintenance Book

Page: 140 / 196

140 2420333140 E06.13 EN
Control
Generator option (For HB135JRT only)
E041
15 mn
4 - Differential protection control
1. Disconnect all equipment connected to the generator (welder, hand equipment, ...).
2. Start up the machine.
3. Start the generator.
4. Wait for the generator to stabilize.
5. Press the TEST button on the 60 A cabinet.
6. Check that there is no voltage at the welder outlet.
8. Press the TEST button on the plug situated in the cage.
9. Check that there is no voltage at the outlet.
10. Reset the outlet by pressing the RESET button.
5 - Additional operation
1. Place the machine in its operating configuration. 3.3.2-Placing in operating configuration
7. Reset the contactor by pressing the RESET button.
If a malfunction occurs, contact HAULOTTE Services®.
1