Haulotte H12SX, Maintenance Book

Page: 21 / 128

21 4001015340 E 12.18 USA / GB
H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL -
H18 SX - HS5388 RT - H18 SXL
C
- Familiarization
1.2 - M
AINTENANCE SUPPORT
Placing the machine in maintenance configuration :
• Lift scissor arms to a sufficient height to tilt the stand.
• Unscrew, rotate and put the stand in the vertical position.
• The stand should remain in the vertical position.
• Lower the scissor arms.
• Scissor arm pivoting rod should rest on the V groove of the stand.
Putting in use position :
• To put back the machine into its normal operation, reverse the steps used above.
The illustrations in this paragraph do not necessarily correspond to the range of products designated in
the manual.
The maintenance support (on both sides of the machine)
must be put in place before any maintenance operations.