Haulotte Group Quick Up 11, Operation And Maintenance Instructions

Page: 41 / 52

Operation and maintenance
29
Caution!
Caution!
5.1.2 - Operating instructions
5.1.2.1 -Disassembly of Mast
1. Remove the mast just as like the previous mentioned.
2. Remove holding bolt fro m clevis blo ck a t the e nd o f cylin der r od fo r
raising.
3. Push carefully outward under part of mast supporting cylinder.
4. Turn carefully mast in order first column to be positioned behind.
5. Remove adjustable nut from sequence cable. Down sequence pulley
bracket and remove it.
6. Remove control box on working platform.
7. Release installation screw connecting box under part of mast. Remove
control cable from mast.
8. Remove adjust screw and rock nut from carrier chain terminal.
9. Push carrier outward to under part of mast and remove it.
Chain shall not be twisted.
10. Lay the chain on the upper part of mast.
11. Push up per colu mn upward in order to be ge t 30 cm a bove an d
assemble installation bolt of idle wheel.
12. Remove idle wheel for installation of wheel shaft plate at the upper part
of column.
13. Remove adjust nut of rock nut at the chain terminal of up per part of
column.
14. Push mast outward to under part of mast and lay down it.
Chain shall not be twisted.
15. Lay the chain down outside of column. Pick the chain and lay it on the
upper part of column.
16. Repeat 11 to 15 step for the rest.
Before de taching cha ins, the chains shall be ma rked for p revention of
misconnection.
Holding bolt
The first column
The second column
The third column
The first chain
The second chain