SKU 95419
For technical questions, please call 1-800-444-3353.
PAGE 11
25.
To install the Wiring Harness on the Trailer, use a Self Tapping Screw (R) to at-
tach the White Ground Wire located at the Plug end of the Wiring Harness to the
small mounting hole in the Right Connecting Rail (3R).
(See Figure I, next page.)
26.
Leave about 18” of wire beyond the Hitch Coupler (7), and run the Wiring Har-
ness along the inside of the Right Connection Rail (3R) to the Front Right Side
Rail (1FR). Then, split the Yellow/Brown Wires from the Green/Brown Wires.
(See Figure I.)
27
Run the Yellow/Brown Wires along the inside of the Front Cross Member (2A) to
the Side Running Light (24) located on the Front Left Side Rail (1FL). Then, run
the Green/Brown Wires along the inside of the Front Right Side Rail (1FR) to the
other Side Running Light.
(See Figure I.)
24.
Secure the rear portion of the Trailer’s frame to the Caster Bases (30L, 30R), us-
ing 3/8” x 1” Carriage Bolts (D) and 3/8” Nylon Nuts (G).
(See Figure H.)
FIGURE H
