SKU 95419
For technical questions, please call 1-800-444-3353.
PAGE 10
through the hole in the Safety Pin (29) to secure the Safety Pin in place.
(See Figure H, next page.)
20.
To attach the Safety Chain (8) to the Hitch Coupler (7), insert a 3/8” x 3-1/2” Bolt
(W) through the center link of the Chain. Then, use a 3/8” Nylon Nut (G) to se-
cure the Safety Chain to the Hitch Coupler.
(See Figure H.)
21.
Attach two Stake Clamps (25) to the Front Cross Member (2A), using 3/8” x 3/4”
Bolts (A) and 3/8” Nylon Nuts (G). Then, repeat this Step for the remaining two
Stake Clamps and the Rear Cross Member (2B).
(See Figure H.)
22.
Remove the Lens from a Side Running Light (24). Insert the Wire Lead of the
Side Running Light through the center hole of the Front Left Side Rail (1FL). At-
tach the Side Running Light to the Front Left Side Rail, using the Self Tapping
Screws (R). Then, reattach the Lens to the Side Running Light. Repeat this Step
for the remaining Side Running Light and the Front Right Side Rail (1FR).
(See Figure H.)
23.
Attach a Tail Light Bracket (26) to the Rear Left Side Rail (1RL), using 3/8” x 3/4”
Bolts (A) and 3/8” Nylon Nuts (G). Attach the License Plate Bracket (27) and Left
Tail Light (28L) to the Tail Light Bracket, using 3/8” Nylon Nuts (G). Repeat this
Step for the remaining Tail Light
Bracket and Rear Right Side Rail (1RR).
(See Figure H.)
FIGURE G
NOTE: PERIODICALLY, GREASE SEAL (32)
ON BACKSIDE OF HUB (18).
