Application
Page 11
5
Application
The unit may be put into operation by trained electricians only or by persons
instructed in the potential dangers. The above mentioned persons must have
read the operating instructions and must follow the instructions, notes and
safety advice.
The unit is intended exclusively for the high-voltage supply of HAUG ionizing
units. It generates an alternating high tension of approx. 7 – 8 kV. It is
intended, in connection with an ionizing unit, for the removal of electrostatic
charges from, for example, glass, paper, plastics etc.
5.1
Putting into operation
Preconditions:
The power pack and the ionizing unit must be connected correctly.
1.
Switch on unit using the mains switch (refer to Figure 1, item 1, page 8).
Summary of Contents for EN SL MT Series
Page 1: ...Power Pack EN SL Version MT Static Line Operating instructions...
Page 2: ......
Page 4: ...This page has been left intentionally blank...
Page 19: ......