The engine should be in a horizontal position
before adding oil or checking the oil level.
7
– Pull out dipstick „1“.
8
– Add engine oil up to the
MAX
mark on dipstick
„1“ (Figures 7 and 8).
– Run the engine for a short time, then check oil
level again and correct if necessary.
1327/2
L3/47
MAX
MIN
1
1
L3/45
A
2
4.1.2. Fuel
Stop the engine before refilling the
fuel tank. Never refuel near a naked
flame or sparks which could start a fire. Don’t
smoke. Use only pure fuel and clean filling
equipment. Take care not to spill fuel.
All diesel oils sold as fuel and complying with
the following minimum specifications can be
used:
EN 590
or
BS 2869 A1 / A2
or
ASTM D 975 - 1D / 2D
Standard version
9
– Before the engine is first started, or if the fuel
system was run dry, prime the fuel delivery
pump at lever „1“ until fuel is heard to flow
back through the return line „2“ to the fuel
tank.
Important !
Remember to replace the access cover for the
fuel delivery pump in the side panel of the en-
gine enclosure after priming the pump (Chap. 2).
L3/46
2
1
12
