Hatteland JH 10T08 MMC, User Manual

Page: 22 / 60

22
INB100014-1 (Rev 27)
IND100133-10
FRONT USB INPUT/OUTPUT:
Supports any USB 2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are
useally included in operating system or on separate installation CD’s delivered with product.
USB 1.1 devices will operate in USB 1.1 mode (12 Mbps).
NOTE: The hatch is IP66 rated if it has a mounted gasket on the back side (introduced Q4 2008).
Reference: http://www.hatteland-display.com/mails/30_2008_pcn.html
Power LED & Power Button:
To turn ON the computer, press down button and release it immediately. The power indication
(LED) will turn green and any operating system will automatically boot. If the computer is in
standby this LED will be red. To turn OFF the computer, press down this button and hold it for 3
seconds. The operating system may require additionally tasks to be performed before computer
shuts down and turns off the unit.
Brightness:
The product features a 100% dimmable image, which means it is capable of displaying a
completely black image when the brightness knob is turned fully to the left.
Note: If the display is delivered with Transflective Technology, the dimming may vary depending on environment.
Transflective Technology uses environment / ambient lighting to preserve / enhance the brightness, meaning such
products are very suitable for viewing in direct sunlight.
HDD LED & Reset Button - Alternative front user controls:
Due to product enhancement in Q4 2008, the MMC series went through a Product Change Notification where the HDD LED and
Reset Button Aperture was removed from standard factory models. Instead, these features was provided as an option.
Reference: http://www.hatteland-display.com/mails/30_2008_pcn.html or review the appropriate user manual:
http://www.hatteland-display.com/pdf/manual/ inb100014-1_usermanual_mmc_etx_slim_rev23.pdf
Front area of panel computer
Power LED
Front USB Connector
Brightness
Power Button
User Controls
Reset (Optional)
HDD LED (Optional)
NOTE: Design & functionality may vary depending on model !