background image

Physical Connections

21

INB100084-1 (Rev 14)

IND100133-38

        

 

Power INPUT: 

The internal AC power module supports both 115VAC/60Hz and 230/50Hz power input using a standard IEC

European power plug. See specifications for more information.

  LPT1 Parallel Port INPUT/OUTPUT:

Standard LPT1 Printer/Parallel (SPP/EPP/ECP) port using a D-SUB 25P Female connector. Fasten the cable to the 

connector using the provided screws on the cable housing itself.

          

  

Network INPUT/OUTPUT:

Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable 

connector ”clicks” into the RJ-45 connector.

 

 

PCIe X16 (add2) Slot:

Supports Full Height and Full Length Profile card in one available slot. Cards is normally installed from factory. Please 

review the General Installation Recommendations chapter in this manual for more information. Additionally consult the 

3rd party manual available on the attached documentation CD delivered with this unit.

 

 

PCI Rev2.3 Slots:

Supports Full Height and Full Length Profile card in two available slots. Cards is normally installed from factory. Please 

review the General Installation Recommendations chapter in this manual for more information. Additionally consult the 

3rd party manual available on the attached documentation CD delivered with this unit.

 

 

PCIe X4 Slot:

Supports Full Height and Full Length Profile card in one available slot. Cards is normally installed from factory. Please 

review the General Installation Recommendations chapter in this manual for more information. Additionally consult the 

3rd party manual available on the attached documentation CD delivered with this unit.

 

 

  

PS/2 Mouse and PS/2 Keyboard INPUTS:

Connect the PS/2 mouse cable to the PS/2 5P Connector (female).

Connect the PS/2 keyboard cable to the PS/2 5P Connector (female).

Summary of Contents for HT 216













































Reviews: