background image

Form No. IRGCEM-1010

3

IMPORTANT SAFETy INFORMATION

ELECTROMAGNETIC INTERFERENCE hAzARD: This unit

generates close-range electromagnetic fields. It has been

designed  to  meet  the  applicable  standards  for  non-

interference with other electronic devices. Make sure other

electronic devices in the vicinity, including pacemakers

and  other  active  implants,  have  been  designed  to  meet

their corresponding applicable standards.

This  unit  must  be  serviced  by  qualified  personnel  only.

Service  by  unqualified  personnel  may  lead  to  electric

shock or burn.

This  unit  has  no  “user-serviceable”  parts.  If  service  is

required on this unit, contact an Authorized hatco Service

Agent  or  contact  the  hatco  Service  Department  at 

414-671-6350; fax 414-671-3976.

BURN hAzARD: 

• Do  not  come  in  contact  with  griddle  surface  during

operation. Griddle surface is very hot.

• Use extreme caution when cleaning hot griddle surface.

Steam and splashing water can burn.

• Do  not  leave  metal  objects  or  utensils  on  or  near

induction range. They may become hot.

• Use  caution  when  wearing  rings,  watches,  or  other

ferrous  objects  around  induction  range.  They  may

become hot.

• Some exterior surfaces on unit will get hot. Use caution

when touching these areas.

Do not block or restrict air flow to air inlet filters or exhaust

fan on bottom of unit.

Never operate without grease tray installed.

Wipe up all spills and splashes immediately. Make sure unit

is dry before using. Do not allow liquid to run into air inlet

filters on bottom of unit.

Do not store anything on top of unit.

Locate unit at the proper counter height in an area that is

convenient for use. The location should be level to prevent

the unit or its contents from falling accidentally and strong

enough to support the weight of the unit and contents.

Do not move unit during operation.

Do not place objects with magnetic properties (credit cards,

cassette tapes, etc...) on or near unit during operation.

Clean  unit  daily  to  avoid  malfunctions  and  maintain

sanitary operation.

Do not use steel wool for cleaning. Steel wool will scratch

the finish.

Use non-abrasive cleaners only. Abrasive cleaners could

scratch the finish of the unit, marring its appearance and

making it susceptible to soil accumulation.

NOTICE

CAUTION

WARNING

ELECTRIC ShOCK hAzARD:

• Plug unit into a properly grounded electrical receptacle

of the correct voltage, size, and plug configuration. If

plug and receptacle do not match, contact a qualified

electrician to determine and install the proper voltage

and size electrical receptacle.

• Turn power OFF, unplug power cord, and allow unit to

cool before performing any maintenance.

• DO NOT submerge or saturate with water. Unit is not

waterproof. Do not operate if unit has been submerged

or saturated with water.

• Unit is not weatherproof. Locate unit indoors where

ambient air temperature is a minimum of 21°C (70°F).

• Do not steam clean or use excessive water on the unit.
• This unit is not “jet-proof” construction. Do not use jet-

clean spray to clean this unit.

• Do not pull unit by power cord.
• Discontinue use if power cord is frayed or worn.
• Do not attempt to repair or replace a damaged power

cord.  The  cord  must  be  replaced  by  hatco,  an

Authorized  hatco  Service  Agent,  or  a  person  with

similar qualifications.

• Do not allow liquids to spill into the unit.
• Use  only  Genuine  hatco  Replacement  Parts  when

service  is  required.  Failure  to  use  Genuine  hatco

Replacement  Parts  will  void  all  warranties  and  may

subject  operators  of  the  equipment  to  hazardous

electrical voltage, resulting in electrical shock or burn.

Genuine  hatco  Replacement  Parts  are  specified  to

operate safely in the environments in which they are

used. Some aftermarket or generic replacement parts

do not have the characteristics that will allow them to

operate safely in hatco equipment.

FIRE hAzARD:

• Locate unit a minimum of 51 mm (2″) from combustible

walls  and  materials.  If  safe  distances  are  not

maintained, discoloration or combustion could occur.

• Never  overload  extension  cord.  Use  heavy  duty,

grounded three-wire extension cord only. Make sure

current carrying capacity of extension cord complies

with electrical rating of unit.

• Do not place unit near or underneath curtains or other

combustible materials. Items near or above unit could

catch fire causing injury and/or damage to unit.

Do not heat unopened containers of food on unit. Sealed,

heated containers may burst open.

This unit is not intended for use by children or persons

with  reduced  physical,  sensory,  or  mental  capabilities.

Ensure proper supervision of children and keep them away

from the unit.

Make sure all operators have been instructed on the safe

and proper use of the unit.

WARNING

Read the following important safety information before using this equipment to avoid serious injury or death and

to avoid damage to equipment or property.

Summary of Contents for IRG15-3000













Reviews: