background image

Form No. IRGCEM-1010

2

CONTENTS

This  manual  provides  the  installation,  safety,  and  operating

instructions for Hatco Induction Griddles. Hatco recommends all

installation, operating, and safety instructions appearing in this

manual be read prior to installation or operation of a unit. 

Safety information that appears in this manual is identified by

the following signal word panels:

WARNING  indicates  a  hazardous  situation  which,  if  not

avoided, could result in death or serious injury.

CAUTION  indicates  a  hazardous  situation  which,  if  not

avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal

injury.

NOTICE

CAUTION

WARNING

INTRODUCTION

Hatco  Induction  Griddles  offer  a  safe,  quick,  efficient,  and

attractive way to prepare foods in commercial kitchens as well

as display cooking locations (omelet bars, buffets, etc...). The

high efficiency, accuracy, and speed of induction cooking make

Hatco  Induction  Griddles  the  perfect  choice  for  quality

foodservice organizations.

Induction  cooking  relies  on  the  creation  of  a  magnetic  field

between the induction coils and a magnetic material (ferrous

material)—the  composite  metal  (ferrous  stainless  steel  and

aluminum)  griddle  surface  of  the  unit.  This  magnetic  field

generates  induction  currents  in  the  griddle  surface,  which

creates instant heat. That heat then is transferred directly to the

food product on the griddle. When the magnetic field is “broken”

by turning off the unit, heat generation stops instantly.

Hatco Induction Griddles are products of extensive research

and  field  testing.  The  materials  used  were  selected  for

maximum  durability,  attractive  appearance,  and  optimum

performance. Every unit is inspected and tested thoroughly

prior to shipment.

Important Owner Information ..............................................2

Introduction...........................................................................2

Important Safety Information...............................................3

Model Description.................................................................4

Model Designation................................................................4

Specifications........................................................................5

Plug Configurations .........................................................5

Electrical Rating Chart.....................................................5

Dimensions......................................................................5

Installation .............................................................................6

General............................................................................6

Operation...............................................................................7

General............................................................................7

Maintenance ..........................................................................8

General............................................................................8

Daily Cleaning .................................................................8

Cleaning the Air Inlet Filters ............................................9

Troubleshooting Guide ......................................................10

Limited Warranty.................................................................11

Service Information ............................................................11

IMPORTANT OWNER INFORMATION

Record  the  model  number,  serial  number  (located  on  the

bottom of the unit), voltage, and purchase date of the unit in

the spaces below. Please have this information available when

calling Hatco for service assistance.

Model No. ____________________________________

Serial No. ____________________________________

Voltage ______________________________________

Date of Purchase ______________________________

Register your unit!

Completing online warranty registration will prevent delay in

obtaining warranty coverage. Access the Hatco website at

www.hatcocorp.com

, select the 

Parts & Service

pull-down

menu, and click on “Warranty Registration”.

Business

8:00 

AM

to 5:00 

PM

Hours:

Central Standard Time (C.S.T.)

(Summer Hours:  June to September – 
8:00 

AM

to 5:00 

PM

C.S.T. 

Monday through Thursday
8:00 

AM

to 2:30 

PM

C.S.T. Friday)

Telephone: (414) 671-6350

E-mail:

[email protected]

Fax:

(414) 671-3976 (Parts and Service)

Additional information can be found by visiting our web site at

www.hatcocorp.com

.

Summary of Contents for IRG15-3000













Reviews: