![background image](http://html1.mh-extra.com/html/hatco/irbr2-6200/irbr2-6200_installation-and-operating-manual_2107000004.webp)
Form No. IRBRCEM-0910
4
MODEL DESCRIPTION
MODEL DESIGNATION
SPECIFICATIONS
The Hatco Model IRBR2-6200 Induction Range is a built-in hob
equipped with two induction coils underneath a ceramic glass
surface. Dual coils enable the use of two pans on a single hob.
The induction coils adapt to the induction-ready pan size to
ensure even heat distribution for even cooking.
Each unit features a remote mounted control panel with infinite
heat controls and an attached 1829 mm (72″) power cord (plug
not included, hardwired connection required). Refer to the
INSTALLATION section of this manual for details on installing
a built-in hob.
NOTE: Refer to “Pan Specifications” in the
OPERATION
section of this manual for details on “induction-ready”
pans, pans not suitable for induction cooking, and pan
sizes.
Hatco Induction Ranges have several safeguards built in to
each unit that ensure protection to the unit as well as the
operators.
• A dual fan ventilation system for each coil ensures that the
electronic circuits in the unit do no overheat. A temperature
probe monitors the electronic circuits and will signal the
unit to shut down if the circuits get too hot.
• A temperature probe in each cooking zone monitors the
zone temperature. This probe detects overheating in the
cooking zone due to an empty pan.
• A sensor in each cooking zone detects when a small,
ferrous object (such as a fork, spoon, or ring) is placed on
the unit. The corresponding coil indicator light on the
control panel will flash and the unit will not operate.
Figure 1. Model IRBR2-6200
Induction
Range
Remote Mounted
Control Panel
Model
Voltage
Watts
Amps
Plug Configuration
Shipping Weight
IRBR2-6200
230 (CE)
6200
27.0
No Plug/Hardwired
15 kg (33 lbs.)
Electrical Rating Chart
Units are supplied from the factory with an electrical cord only.
A qualified electrician must connect the unit to the on-site
electrical system.
NOTE: The specification label is located on the bottom of the
unit. See label for serial number and verification of unit
electrical information.
NOTE: Shipping weight includes packaging.
I R B R 2 - XXXX
Induction Range
Unit Wattage
Two Coils
Built-In
Remote Mounted Controls
Figure 2. Model Designation
ELECTRIC ShOCK hAzARD: Units supplied without an
electrical plug require a hardwired connection to on-site
electrical system. Connection must be properly grounded
and of correct voltage, size, and configuration for electrical
specifications of unit. Contact a qualified electrician to
determine and perform proper electrical connection.
WARNING