ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: [email protected]
FR2
HYDRO-HEATER FOOD RETHERMALIZERS / BAIN-MARIE HEATERS
Models FR2-3, -4, -6
FR2-3B, -4B, -6B, -9B
SPECIFICATIONS
Model
kW
Phase
Shipping Weight
FR2-3
3
1
24 lbs. (11 kg)
FR2-4
4
1
24 lbs. (11 kg)
FR2-6
6
1
27 lbs. (12 kg)
FR2-3B
✝
3
3
24 lbs. (11 kg)
FR2-4B
✝
4
3
24 lbs. (11 kg)
FR2-6B
✝
6
3
27 lbs. (12 kg)
FR2-9B
✝
9
3
27 lbs. (12 kg)
DIMENSIONS
7
3
⁄
4
"W x 17
1
⁄
8
"D x 12
3
⁄
8
"H (197 x 435 x 314 mm).
VOLTAGE
208 or 240 volts, 50/60 Hz.
PLUG CONFIGURATIONS
(FR2-3 and FR2-4 only)
NEMA 6-30P
NEMA 6-20P
FR2-3: 208 or 240 volts (uses NEMA 6-20P).
FR2-4: 208 volts (uses NEMA 6-30P, 240 volts uses NEMA 6-20P,
NEMA 6-30P – Canada).
OPTIONS (NOT FOR RETROFIT)
❑
Stainless Steel Body and Base
❑
Auto-fill Solenoid
❑
Remote Mounted Control
❑
Security Package
ACCESSORIES
❑
4' (1219 mm) Cord with Plug
(NEMA 6-20P) and Receptacle (NEMA 6-20R) (FR2-3 only)
❑
4' (1219 mm) Cord with Plug
(NEMA 6-30P) and Receptacle (NEMA 6-30R) (FR2-4 only)
❑
Flush Hose, Cleaning Brush, Stopper, and Adapter
SIZING INFORMATION
For a Bain-Marie or Steam Table:
MINIMUM 750 WATTS PER
SQUARE FOOT
(0,8 watts per sq. cm) of vessel top.
For a Food Rethermalizer:
MINIMUM 2000 WATTS PER
SQUARE FOOT
(2,2 watts per sq. cm) of vessel top.
Use one FR2 for a Bain-Marie up to 6' (1829 mm) long.
Over 6' (1829 mm), minimum two required.
MUST BE INSTALLED WITH A PERFORATED WATER
BAFFLE.
This baffle is
not supplied
with heater. The FR2
should be positioned with no more than 3' (914 mm) on either
side when mounted in holding vessel. Consult factory or
installation manual for fabricating details.
PRODUCT SPECS
Hydro-Heater Food Reconstitutor/Bain-Marie Heater
The electric heater designed to hold foods in the bain-marie or
heat and hold frozen foods in a food reconstitutor shall be a
Hydro-Heater Model .... as manufactured by the Hatco
Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 service (U.S. and Canada only), the Hatco Model FR2
shall be rated at ....kW, ....volts, ....phase. The heater shall be
complete with all internal plumbing and wiring ready for external
installation to the bottom of the
holding vessel.
The heater shall consist of 1 to 3 stainless steel tubes wrapped
with external heating elements. Each tube may be accessed for
cleaning purposes. The unit may be emptied easily by a
convenient drain.
The heater shall be equipped with an electronic temperature
controller adjustable from 140°F to 190°F (60° to 88°C),
an on-off switch, a low-water cut-off, and a digital
temperature display.
The heater shall consist of powdercoated black hammertone
front and body (or optional stainless steel body and base).
✝
Balanced 3-phase.
SIDE VIEW
REAR VIEW
9
3
⁄
4
"
(248 mm)
1
⁄
2
" &
3
⁄
4
"
Conduit K.O.
1
⁄
2
" &
3
⁄
4
" Conduit K.O.
3
⁄
4
" hose
connection
to drain
1"
(25 mm)
12
3
⁄
8
"
(314 mm)
5
1
⁄
2
"
(140 mm)
8
1
⁄
2
" (216 mm)
3
3
⁄
8
" (86 mm)
6
3
⁄
4
"
(171 mm)
3
1
⁄
16
"
(78 mm)
17
1
⁄
8
" (435 mm)
2
5
⁄
8
"
(67 mm)
Form No. FR2 Spec Sheet
Printed in U.S.A.
January 2007
