Form No. GR3M-0807
5
INSTALLATION
UNPACKING
Glo-Ray
®
Heated Glass Overshelves are shipped
with most components pre-assembled. Care should
be taken when unpacking shipping carton to avoid
damage to unit and components enclosed.
1. Remove unit from box.
2. Remove information packet. To prevent delay
in obtaining warranty coverage, fill out and
mail in the warranty card.
3. Remove tape and protective packaging from all
surfaces of unit.
LOCATION
For proper operation and maximum performance,
locate the Heated Glass Overshelf in an area where
the ambient air temperature is constant and is a
minimum of 70°F (21°C). Areas which are
susceptible to active air movements or currents
should be avoided, i.e., near exhaust fans or hoods
and air conditioning ducts.
CAUTION
Unit is not weatherproof. For safe and proper
operation locate the unit indoors where the
ambient air temperature is constant and is
a minimum of 70°F (21°C).
WARNING
For safe and proper operation, the unit must be
located a reasonable distance from combustible
walls and materials. If safe distances are not
maintained, discoloration or combustion could
occur.
CAUTION
To avoid any injury or damage locate the unit at
the proper counter height, in an area that is
convenient for use. The location should be level
to prevent the unit or its contents from
accidentally falling, and strong enough to
support the weight of the unit and food
displayed.
CAUTION
All electrical connections must be in accordance
with local electrical codes and any other
applicable codes. Connections should be made
by a qualified, licensed electrician.
NOTICE
Damage to countertop material such as Corian
®
and similar products caused by heat generated
from Hatco equipment is not covered under the
Hatco warranty. Recommended for use over
metallic counters. For other surfaces, verify that
the material is suitable for temperature up to
180°F (82°C).
Summary of Contents for GR3-27
Page 14: ...Form No GR3M 0807 12 NOTES ...
Page 15: ...Form No GR3M 0807 13 NOTES ...