![background image](http://html.mh-extra.com/html/hatco/gr3-27/gr3-27_installation-and-operating-manual_2106960012.webp)
Form No. GR3M-0807
10
ACCESSORIES
BREATH PROTECTOR(S)
Accessory breath protector(s) are available from the
factory. Refer to Figure 8 and follow these steps to
install them.
1. Remove protective paper from acrylic surfaces.
2. Loosen 3 screws from underside of shelf. Slide
mounting bracket into position with studs facing
to the front and down. Tighten 3 screws.
Figure 8. Installing Accessory Breath Protectors
3. Align breath protector mounting holes with studs
and secure using acorn nuts provided. Do not
overtighten.
Stud
Breath Protector
Mounting Bracket
Acorn Nut
Summary of Contents for GR3-27
Page 14: ...Form No GR3M 0807 12 NOTES ...
Page 15: ...Form No GR3M 0807 13 NOTES ...