MODEL DESCRIPTION
4
Form No. GR2S2BWm-0511
GR2BW Models
Glo-Ray
Designer
Buffet Warmers are available in lengths from
30-1/4" to 78-1/4" (768 to 1988 mm) and include prefocused
infrared overhead heat, incandescent display lights, and easy-
to-install sneeze guards.
Figure 2. GR2BW model
Sneeze Guard
Heated Base
All Models
Glo-Ray
Designer
Heated Shelves and Buffet Warmers are
ideal for holding hot food on a buffet line or at temporary serving
areas. all
Designer
models are constructed of sturdy aluminum
extrusions and feature a thermostatically-controlled heated
base,
Designer
color inset panels, and a cord and plug set.
NOTE: Refer to the
OPTIONS aND aCCESSORIES
section for
additional information.
GR2S Models
Glo-Ray
Designer
Heated Shelves are available in sizes from
30-1/4" to 78-1/4" (768 to 1988 mm) in length. all GR2S models
are shipped from the factory fully assembled and ready for use.
Figure 1. GR2S model
Heated Base
MODEL DESIGNATION
SPECIFICATIONS
Figure 3. model Designation
G R 2 B W - XX
Glo-Ray
Designer
Heated Surface Width
BW = Buffet Warmer
S = Heated Shelf
Plug Configurations
Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the application.
ELECTRIC SHOCK HAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: The specification label is located on the control panel
on the back of the unit. See label for serial number and
verification of unit electrical information.
NOTE: Receptacle not supplied by Hatco.
WARNING
Figure 4. Plug Configurations
CEE 7/7 Schuko
BS-1363
NEMA 5-15P
NEMA 5-20P
NEMA 14-20P
