Form No. GRJWM-0406
1
IMPORTANT SAFETY INFORMATION
IMPORTANT! Read the following important safety instructions to avoid personal injury
or death, and to avoid damage to the equipment or property.
CAUTIONS
Some exterior surfaces on the unit will get
hot. Use caution when touching these areas
to avoid injury.
Locate the unit at the proper counter height,
in an area that is convenient for use. The
location should be level to prevent the unit or
its contents from accidentally falling, and
strong enough to support the weight of the
unit and food.
For safe and proper operation, the unit must
be located a reasonable distance from
combustible walls and materials. If safe
distances are not maintained, discoloration or
combustion could occur.
Unit is not weatherproof. For safe and proper
operation locate the unit indoors where the
ambient air temperature is a minimum of 70°F
(21°C).
CAUTIONS
Use only non-abrasive cleaners. Abrasive
cleaners could scratch the finish marring its
appearance and making it susceptible to dirt
accumulation.
WARNINGS
To avoid any injury, turn the power switch
OFF, unplug the unit from the power source
and allow to cool before performing any
maintenance.
Plug unit into a properly grounded electrical
outlet of the correct voltage, size and plug
configuration. If the plug and receptacle do
not match, contact a qualified electrician to
determine the proper voltage and size and
install the proper electrical outlet.
To avoid any injury or damage to the unit do
not pull unit by power cord.
To prevent any injury, discontinue use if
power cord is frayed or worn.
Unit is not waterproof. DO NOT submerge
in water. Do not operate if it has been
submerged in water.
To avoid electrical shock or personal injury,
do not steam clean or use excessive water on
the unit.
To avoid any injury or damage to the unit
thermostat adjustments must only be
performed by authorized personnel.
This product has no “user” serviceable parts.
To avoid damage to the unit or injury to
personnel, use only Authorized Hatco Service
Agents and Genuine Hatco Parts when
service is required.
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact
the Hatco Service Department at 414-671-6350
or 800-558-0607; International fax 414-671-
3976 or fax 800-690-2966.
Genuine Hatco Replacement Parts are
specified to operate safely in the
environments in which they are used. Some
aftermarket or generic replacement parts do
not have the characteristics that will allow
them to operate safely in Hatco equipment. It
is essential to use Hatco Replacement Parts
when repairing Hatco equipment. Failure to
use Hatco Replacement Parts may subject
operators of the equipment to hazardous
electrical voltage, resulting in electrical shock
or burn.
Summary of Contents for GLO-RAY GRJW Series
Page 14: ...Form No GRJWM 0406 12 NOTES ...
Page 15: ...Form No GRJWM 0406 13 NOTES ...
