NOTE: Hatco shatter-resistant light bulbs meet NSF
standards for food holding and display areas. For
120, 120/208 and 120/240 Volt applications, use
Hatco part number 02.30.043.00. For 220, 240,
220-230 and 230-240 Volt applications use Hatco
part number 02.30.058.00.
WARNING
Only light bulbs which meet or exceed NSF
standards, specially designed for food holding
areas may be used. Breakage of light bulbs not
specially coated could result in personal injury
and/or food contamination.
WARNING
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966 or International
fax 414-671-3976.
WARNING
This product has no “user” serviceable parts. To
avoid damage to the unit or injury to personnel,
use only Authorized Hatco Service Agents and
Genuine Hatco Replacement Parts when service
is required.
WARNING
Genuine Hatco Replacement Parts are specified
to operate safely in the environments in which
they are used. Some aftermarket or generic
replacement
parts
do
not
have
the
characteristics that will allow them to operate
safely in Hatco equipment. It is essential to use
Hatco Replacement Parts when repairing Hatco
equipment. Failure to use Hatco Replacement
Parts may subject operators of the equipment to
hazardous
electrical
voltage,
resulting
in
electrical shock or burn.
Form No. GRFSM-0307
8
MAINTENANCE
CLEANING
Hatco’s Glo-Ray
®
Fry Station Foodwarmer units are
designed for maximum durability and performance,
with minimum maintenance.
WARNING
To avoid any injury, turn the power switch OFF
unplug the unit from the power source and allow
to cool completely before performing any
maintenance and cleaning.
WARNING
The unit is not waterproof. DO NOT submerge in
water. Do not operate if unit has been
submerged in water.
To preserve the finish of the Glo-Ray Fry Station
Foodwarmer, it is recommended that the surfaces
be wiped daily with a clean, soft, damp cloth.
Stubborn stains maybe be removed with a good
stainless steel cleaner or a non-abrasive cleaner.
Hard to reach areas should be cleaned with a small
brush and mild soap.
NOTICE
Use only non-abrasive cleaners. Abrasive
cleaners could scratch the finish of your unit
marring
its
appearance
and
making
it
susceptible to soil accumulation.
DISPLAY LIGHT BULB REPLACEMENT
The display light is an incandescent bulb which
illuminates the warming area. This bulb has a
special coating to guard against injury and food
contamination in the event of breakage.
To replace a bulb, disconnect the power supply and
wait until the unit has cooled. Unscrew the bulb from
the unit and replace it with a new specially coated
incandescent bulb. Hatco shatter-resistant bulbs
meet NSF standards for food holding and display
areas.
OPTIONS
INCANDESCENT LIGHT
The Fry Station Foodwarmer may be equipped with
incandescent display lights to illuminate the
warming area.
Shatter-resistant bulbs guard against injury and
food contamination in the event of breakage. The
display lighting meets NSF standards for food
holding and display areas.
NOTE: Display lights cannot be retrofitted to units.
INFINITE CONTROL
An optional infinite control is available for a more
precise temperature control.
NOTE: Optional infinite control is only available on
the GRFS, GRFSL, GRFSR, & GRFSLR Models.
Not available for retrofit.
All manuals and user guides at all-guides.com
