FSM-1022
11
OPTIONS AND ACCESSORIES
4″ (102 mm) Adjustable Legs
The 4″ (102 mm) adjustable legs are used to add additional
height to the unit and are available as accessories. Use the
following procedure to install legs.
1. Remove the display rack and secure all glass sides and
doors with tape. Carefully lay the unit on its side.
NOTICE
:
Do not lay unit on side with control panel.
Lengthen
Shorten
Adjustable Tip
2. Screw the 4″ (102 mm) legs into
the holes in the middle of each
corner bracket. After all the legs
are tightened, return the unit to its
upright position. If the unit is not
level or rocks, turn the adjustable
tip of the appropriate leg to level
the unit.
NOTE: 4″ (102 mm) legs are adjustable for leveling the unit.
Use a 5/8″ (16 mm) open-end wrench to make leveling
adjustments once the unit is placed in final position.
Merchandising Display Sign
Merchandising display signs are available to promote food
products. The display sign mounts to the top of the unit using
existing screws.
Display Racks
Several display racks are available to “customize” units to
specific foodservice operations.
Auto Fill
The optional auto-fill automatically fills the reservoir when the
unit is energized and a low water condition is detected. The fill
cycle is indicated by a red light.
Attach the auto-fill quick-connect coupling to a 1/4 in. plastic
or copper tube and connect to the distilled water source. Then
insert the coupling into the·auto-fill hole.
Water Line
Quick-Connect
Coupling
Auto-Fill Connection
