DIRECTION OF USE
This fan is operated by touch screen system and remote control.
Touch screen system
can be activated using fingers to touch
the control and display panel. When the machine is left idle for 1 minute, the operating lights will dim but the fan will still be
operating as normal. By simply touching the control and display panel, the lights will illuminate and the fan will be ready to be
adjusted again.
Remote control
, point the remote signal transmitter in the direction of the signal receiver on the control and display panel.
Avoid having obstructions between the remote signal transmitter and the receiver.
Plug power supply cord into a 220V, 50Hz power socket.
1.
2.
3.
3.1
3.2
4.
5.
6.
7.
8.
9.
ON/ OFF
SPEED
TIMER
TIMER OFF
TIMER ON
COOL
SWING
IONIZER
FILL WATER
ELCB
TEMPERATURE
Touch the switch on the control and display panel to turn on the fan. The light will show the resumed settings
of the fan’s latest operation before having been switched off. To turn the fan off, touch the switch again for
about 1.5 seconds (When the air cooler is switched off while the COOL function is activated, the fan will
continue to operate for 1 minute to remove moisture. The fan will stop working immediately afterwards)
5 adjustable fan speed settings 0: off,1: lowest speed, 2: low speed, 3: medium speed, 4: high speed,
5: highest speed, respectively.
Switch for timing the fan’s operation: 1, 2, 4, 8 hours or to cancel timing altogether, respective to the number of time
the sensor is touched. Once set, the timer will indicate the remaining time left of the duration.
Set the timer while the fan is switched on to set the time when the fan is to automatically turn off.
Set the timer while the fan is turned off (but it must be plugged in) to set the time when the fan is to
automatically turn on. After adjusting the settings, the operating lights will dim. When the time comes,
the fan will resume settings of the latest operation before having been switched off.
Switch for activating the water cooling system. Touch the switch to activate the function. Touch the
switch again to deactivate the function.
Switch for adjusting left to right swinging motions. Touch the switch to activate the function. Touch the switch
again to deactivate the function.
Switch for activating the Ionize system. Touch the switch to activate the function, the light will illuminate indicating
the operation of the Ionize system. Touch the switch again to deactivate the function.
A warning orange light will light up when the water level in the tank is too low for the water distribution
system to function (unable to activate COOL function). Turn off and unplug the machine to fill the water
tank with clean water (do not exceed MAX level). The warning light will go off when the machine is turned
on and the COOL function is activated.
A warning red light with a warning sound will appear when there is electricity leakage. The circuit breaker
system will immediately be activated.
Temperature display for surrounding area of the fan, While the fan is turned off or on (but it must be plugged in)
3
9
7
6
4
5
2
8 1
FILL
WATER
ELCB
CAUTION
1.
2.
3.
Unplug the fan before cleaning or changing the components, and when not in use for a long period of time.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experiences and knowledge, unless they have been given supervision or instruction concerning use of the appliance.
Children should be supervised to ensure they do not play with the appliance.
5
