8
ImageBank-II
without battery
ImageBank-II
with battery
External
power supply
The ImageBank-II is powered by
either a battery or an external
power supply (battery elimi-
nator) when used to store new
captures.
The ImageBank-II can also supply
power to a digital back.
Connecting the ImageBank-II
Storage selection:
Once connected and active, the camera/digital back will automatically select the
ImageBank-II as current storage when it too is active. Alternatively, you can:
• switch between a CF card and the ImageBank-II as storage medium using the MEDIA
menu on the digital back.
• change the storage media by pressing the navigation button on the back during
image preview until the media list is shown.
Please refer to the camera/digital back user manual for full details.
The back will automatically switch to the last inserted media as current storage medium.
For example, if a CF-card is inserted after the ImageBank-II was connected, with camera
/digital back will automatically choose the CF-card instead of the ImageBank-II.
External power supply operation
An external power supply is covenient in a studio environment or in the vicinity of a
domestic power outlet or generator on location to eliminate the need for a separate battery.
Please ensure you only use recommended units. The external power supply naturally
eliminates any need for a separate battery.
Just connect the plug from the active power supply to the ImageBank-II. The ImageBank-
II will be active immediately as the ON/OFF but has no effect in this mode of operation.
To turn the The ImageBank-II off, just disconnect the power supply cable.
Summary of Contents for ImageBank - ll
Page 1: ...User Manual ImageBank ll ...
