11
2.
Preparation for the match:
All sliding devices and fixing eyes are already provided at the uprights. Only the caps
have to be mounted, uprights to be erected and net to be fixed.
The following tools are necessary:
-
hammer/mallet
-
drill 1.5 mm
-
cross-head screwdriver (in case of round uprights)
a) Fixing of caps:
Stick caps in the upright at the top and at the bottom. Use a mallet if necessary. Open
caps by boring them through upright’s borings with 1.5 mm drill. Then fix plug pins with a
hammer/mallet in case of square uprights. In case of round uprights screw self-tapping
screws 4 x 25 mm (see the following pictures).
b)
Installation of uprights:
If the unit is inserted in existing ground sockets it has to be guaranteed that they
are suitable for the uprights. Otherwise safety certificates are no longer valid and
warranty claims expire!
Instructions to concrete aluminium ground sockets see point 6.
After having fixed the caps set uprights into the ground sockets. Take care that
handwheels are tightened so that sliding devices are fixed.
Tighten handwheels before
installation of uprights
in ground sockets.
Fixing of cap in square upright:
Fixing of cap in round upright: