Hasler WJ185, User Manual

Page: 20 / 178

Overall presentation 20
ORIG0140-20
4127718F/B
02/26/2007
1.2.4 Installation of the mixed-mail feeder (optional)
The mixed-mail feeder operates with an optical sensor
next to the feed platform. Thus, it should not be installed
in an area exposed to any excessive light source.
- Align as much as possible the feeder with the mailing machine;
- Push the feeder towards the mailing machine (or the dynamic
scale), taking care to keep the alignment using the centering
pin;
- Insert the feeder screw into the mailing machine (or the dynamic
scale), then using the knob, tighten while pressing the screw to
lock it (if the units are not properly brought close together, gently
turn the gear protruding from the feeder and repeat the procedure):
centering pin
tightening knob (on the side)
(gear)